#1
I have a PRS SE Custom 24, the model with the tremolo(obviously). Recently, I took off the plate that covers the springs for the trem, and I noticed that the piece connecting the springs(not the block) was uneven. As in, the left side was more toward the bridge than the right side was. After further inspection, I discovered that the hole for the screw on the left side was too big. I was wondering how I would go about fixing this. Is it a relatively simple fix, or should I take it to a guitar tech who knows what he's doing?
#3
^+1
tooth picks work well also
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#5
Okay. I did the toothpick thing with a strap button, but I didn't know if it would work in this situation. Thanks!