#1
Hey, guys!

We designed a very compact tube guitar amplifier!
50 Watt Tube Amp SOLO takes only one rack space (1U) – it is very compact and much lighter than other Tube Amps (weight is about 7 kg), what allows to ease transportation and to use it both for Studio and Stage.

2 footswitchable Sounds – CLEAN/LEAD (LEAD1/LEAD2), FX LOOP ON/OFF– give possibility of getting from Classic to Modern Sound. Amp SOLO utilizes 12AX7 Preamp Tubes and 6L6 Power Tubes which can be swapped out with EL34s for a more British Vibe. The Tube buffered Effects Loop is a serial/parallel design with the Effects Mix Control knob.

LINE Output: Mono Output can be routed to a Power Amp or a FX Device via a shielded cable.

RECORD Output: Mono Output to a recording console or a live Mixing Board.

A rotary Impedance allows the use of 4, 8 or 16 Ohm Speaker Cabinets.
http://www.youtube.com/watch?v=wXV8rPl9TDE
https://www.facebook.com/rnramplification
http://postimg.org/image/1gapzw7k4/
http://img-fotki.yandex.ru/get/9795/39708930.0/0_9355c_8589b463_orig

PREAMPLIFIER SL|LD. https://www.facebook.com/notes/rr-so...79029042168528
http://img-fotki.yandex.ru/get/3505/rnrsound.0/0_21812_c6e866de_orig
http://img-fotki.yandex.ru/get/3503/rnrsound.0/0_21811_99e493a6_orig
3-channel Tube Preamp SL/LD is equipped with five 12AX7 preamp tubes, which are used for producing cascaded high-gain tones and FX Loop circuits. It takes one rack space (1 U), which is ideal for regular gigging. It is small and light enough to be portable while also offering a wide tonal range for use in the studio environment. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed.

Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each SL/LD Preamp. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.
3 Independent Channels, each channel is equipped with independent Gain, Master Volume and EQ controls.
CH-1 CLEAN channel produces a wide array of crystal clear yet complex clean sounds. When the channel’s Gain control is cranked up, a beautiful bluesy solo sound is possible. Turning the Gain down is more suitable for fingering.

CH-2 LEAD 1 – a dynamic overdrive reacts to your picking attack. Crank the gain high and there’s enough saturation for blues styles and old school hard rock. For a brutally heavy metal tone it also gives tons of definition and punch to speed picking and fast palm-muted rhythms. A BRIGHT switch adds glassy tone to your solos while the rhythm becomes more edgy and sharp.

CH-3 LEAD 2 – Drive channel – is the highest gain of the two LEAD channels – very dense, aggressive, heavy high-gain tone, so-called California sound. High-gain end is huge. Great for achieving warmest fattest sounds with high density.

FX LOOP can be switched from series to parallel (SERIES / PARALLEL) with the switch on rear panel (FX ON / FX OFF) separately for each channel (CLEAN / LEAD). It also can be controlled by two-button Foot Switch, which is connected with pre-amp via FSW LOOP jack on rear panel.

Instrument Input Jack is located on the Rear panel for easier commutation in rack.

OUTPUTs:

• PHONES – specialized headphones output
• POWER AMP – specialized output for connecting with Power Amplifier Input (as a pre-amp)
• LINE OUT – output for connecting the amplifier's instrument input, amplifier’s RETURN jack or Power Amplifier Input (as a pre-amp)
• REC OUT - Mono Output to a recording console or a live Mixing Board
COVER PLATE - removable cover to protect the vacuum tubes from mechanical damage

Weight: 4.1 kg
Size: 482.6mm W x 44.0mm H x 185.0mm D


Two-button Channel Footswitch R&R SOUND FS-32 is included.
The PRICE is $600 + delivery.


PREAMPLIFIER DP-13. https://www.facebook.com/notes/rr-so...82378721833560
DP-13 is a thee-channel tube guitar preamplifier, designed on five 12AX7. It takes only 1-rack space (1U), which makes it very portable, but in spite of its “small package” it provides the tone and versatility of a big amp and you can use it both for Studio and Stage. DP-13 is able to produce a great tonal range that would help you to get your own unique sound.


All-tube bias section (5x12AX7) with the possibility of replacing your power tubes by tubes of other manufacturers separately for clean and overdriven tone.

Three Independent channels, each channel is equipped with independent Gain, Master Volume and EQ controls.

CH-1 CLEAN – clean channel – produces a wide array of crystal clear yet complex clean sounds. When the channel’s Gain control is cranked up, a beautiful bluesy solo sound is possible. Turning the Gain down is more suitable for fingering.

CH-2 LEAD 1 – this channel makes a perfect match for Hard Rocker or Classic Rock fan. It easyly gives a great sound for AC/DC riffs. Set low Gain on this channel and you will get that familiar Crunch with its clarity and saturation. With the Gain cranked all the way up it is able to provide a very fat heavy rhythm tone, which would sound quite saturated through the mix. So wide range of possible settings would be sufficient for any of your choice: from solo to spiky brutal riffs. You can also use it in conjunction with pedals (for example Ibanez Tube Screamer).

CH-3 LEAD 2 – the main feature of this Channel is than Gain knob regulates the sound from crystal clear to extremely overdriven. And even with the highest Gain set the tone doesn’t lose its articulation and density. This channel is really very versatile: the tone can be soft and flexible while also providing possibility of a thick cutting distorted sound. Crank the Gain to 3 o’clock and get the heaviest sound ever possible. Turn it to 12 o‘clock and Classic rock would be “grateful” to you for new ideas, inspired by the sound of this channel.

FX LOOP - can be switched from series to parallel (SERIES / PARALLEL) with the switch on rear panel (FX ON / FX OFF) separately for each channel (CLEAN / LEAD). It also can be controlled by two-button Foot Switch, which is connected with pre-amp via FSW LOOP jack on rear panel.


Instrument Input Jack is located on the Rear panel for easier commutation in rack.

OUTPUTs:

PHONES – specialized headphones output
POWER AMP – specialized output for connecting with Power Amplifier Input (as a pre-amp)
LINE OUT – output for connecting the amplifier's instrument input, amplifier’s RETURN jack or Power Amplifier Input (as a pre-amp)
REC OUT - Mono Output to a recording console or a live Mixing Board

COVER PLATE - removable cover to protect the vacuum tubes from mechanical damage

Weight: 4.1 kg
Size: 482.6mm W x 44.0mm H x 185.0mm D

R&R SOUND FS-32

Two-button Channel Footswitch R&R SOUND FS-32 is included.

The PRICE is $600 + delivery.

Shipping Company : Economy Post and Express Post.
Payment method : PayPal Preferred
CONTACT US: rnrsound@yandex.ru