#1
Hi guys. I have a tele body that I would like to stain blue and have found a kit on wudtones that will do it, however it isn't dark enough for what I am after.

Is there anything someone could recommend or would something like fence panel wood pain work well?

Thank

Atr
Running through:

Engl Fireball
Engl Slanted Cab
Ibanez Xiphos
Schecter C-1 FR Black
Ibanez GRG (on its way)

Pedals:
Boss Noise Gate, Zakk Wylde Overdrive, Boss Tuner, Zakk Wylde Wah.
#2
Look up TransTint wood dye. I've found the best color comes from the water based dyes but you have to pre raise the grain first.

What type of wood is it?
#3
How do I pre raise the grain.

Not sure on the wood, I will take a pic and upload it later
Running through:

Engl Fireball
Engl Slanted Cab
Ibanez Xiphos
Schecter C-1 FR Black
Ibanez GRG (on its way)

Pedals:
Boss Noise Gate, Zakk Wylde Overdrive, Boss Tuner, Zakk Wylde Wah.
#5
Cheers mate. Didn't realise they did that sort of thing.
Running through:

Engl Fireball
Engl Slanted Cab
Ibanez Xiphos
Schecter C-1 FR Black
Ibanez GRG (on its way)

Pedals:
Boss Noise Gate, Zakk Wylde Overdrive, Boss Tuner, Zakk Wylde Wah.
#6
Sorry for the late reply. Start by sanding the body to a fine grit then wipe down with water and let it dry. The wood will feel all fuzzy, you then sand it again and wipe with water again untill it's no longer fuzzy.

I only ask the wood type because some woods taske stains better thn others, I like to use a stain conditioner on maple or poplar but ash takes stains well enough without it.