#1
anybody have an idea of what kind of bridge piece will properly fit a peavey horizon ii? it was built in 1985 and i cant seem to find an original or direct replacement.

the body and neck are in great condition. the pickup wiring was shot and so were the pups. whoever had it decided to use wood screws to hold the bridge down to the body. they also used wood screws to hold the bridge together as well. it looks like hell.

so any ideas on what i can use to replace it?
Live Rig
Michael Kelly Custom Shop Plum Telecaster
Michael Kelly Custom Shop Plum Patriot


EVH 5153 50w
Jet City 2x12
Custom Board

It is NOT trash metal it is tHrash metal...get it right
Last edited by iheartgun at May 17, 2014,
#2
pic's?
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#5
I'm not sure it would work due to the current bridge using anchors like on a stop tail system.
Live Rig
Michael Kelly Custom Shop Plum Telecaster
Michael Kelly Custom Shop Plum Patriot


EVH 5153 50w
Jet City 2x12
Custom Board

It is NOT trash metal it is tHrash metal...get it right
#6
Quote by iheartgun
I'm not sure it would work due to the current bridge using anchors like on a stop tail system.

It will work, you just need to drill new holes for the bridge
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#7
i think i can save the tremolo bridge itself and if i cant i have a buddy who can make an exact replica. but the bridge block underneath is shot. i was thinking this

http://www.guitarfetish.com/USA-Spaced-2-732-Spaced-Solid-Brass-trem-Block_p_1148.html

how would i find out the spacing?
Live Rig
Michael Kelly Custom Shop Plum Telecaster
Michael Kelly Custom Shop Plum Patriot


EVH 5153 50w
Jet City 2x12
Custom Board

It is NOT trash metal it is tHrash metal...get it right
#9
is the bridge a trem or hardtail? the pic looked like a hard-tail to me.
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#10
it looks like a hardtail but there are 2 lugs in the body that 2 screws go into that have a pivot point on them.

where would i measure it? sorry ive never done any bridge work besides intonate and raise and lower lol
Live Rig
Michael Kelly Custom Shop Plum Telecaster
Michael Kelly Custom Shop Plum Patriot


EVH 5153 50w
Jet City 2x12
Custom Board

It is NOT trash metal it is tHrash metal...get it right
#11
Get one of these, decent, cheap and it will fit any spacing

www.guitarfetish.com/Wilkinson-Stainless-Saddle-Trem-Fits-ALL-Strats-Sparkling-Chrome_p_895.html

you measure from post to post
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#12
boom! done!

thanks!
Live Rig
Michael Kelly Custom Shop Plum Telecaster
Michael Kelly Custom Shop Plum Patriot


EVH 5153 50w
Jet City 2x12
Custom Board

It is NOT trash metal it is tHrash metal...get it right