#1
So my peavey ultra combo stopped working and im pretty sure it is just a blown out fuse because i have tried replacing power tubes and it just doesnt turn on. The problem is i cant find where the fuse is located. I have not removed the head unit from the cab of the amp to find it if that is what i need to do. Also when replacing this thing how do i know what fuse to get to replace it.
#2
the fuse is on the inside of the amp

Your power tubes probably went bad. I think it is a Fast blow 3A
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#3
i opened the amp and i see the fuse and it is defiantly the problem i just dont know how to remove the fuse. it looks like i can take it out but i wont budge when i try to remove it.
#4
pop it out

it may have blown because of the power tubes
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#7
Quote by ENISA
Also it says right on the fuse that it is a 3a 250v

well get the same fuse, radio shack has them (or a music store)

get a new set of power-tubes, JJ are good and pretty cheap $40 or less for 2 matched at most places
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate