#1
So I'm going to be running to an issue with my pedalboard; I'm going to be adding a few new pedals to my chain, and I don't really know the best way to connect pedals on opposite ends of the board.

This is how my board currently looks:



(I'm getting rid of the CS-3, just don't like it)

So once I get the new pedals, my chain will go:

Guitar>
*Wah (Not pictured)
*TU-3
*GT-OD
*Soda Meiser Fuzz (Once I have the money)
*Phase 90
*Black Label Chorus
*BBE Soul Vibe (Coming in tomorrow)
*RV-5 (Again, once I get the money)
*Smart Gate
*DD-3
<Amp

So the thing is, that red cable is the longest patch one I have, and I don't want to have a long guitar cord going all the way across my board from the chorus to the vibe. What can I do instead?

I'm a bit of a noob when it comes to pedalboards and stuff

Any suggestions would be awesome.
Guitars:
-Gibson Les Paul Custom Shop Silverburst (Invader/'59)
-Fender Standard Telecaster HH Black (SH-5/'59)
-Fender Standard Stratocaster HH White (Nazgul/'59)
-Austin Guitars Les Paul Goldtop Copy (Distortion/'59)
-Ovation ApplauseAE44II Elite Black Acoustic


Amps/Cabs
-Peavey 6505+
-Peavey Stereo Chorus 2x12 Combo
-Behringer Ultracoustic ACX450 1x8 Acoustic Combo
-Marshall MX2x12 Cabinet


Wayyyyy too many effects pedals...
#3
You could probably run a longer cable under the board and zip tie it to keep it tidy. Just a thought.

Some of those pedals work best in the fx loop, doesn't the 6505 have an fx loop or do you just prefer them in front?
Fender Mustang/Derfenstein DST> Boss Power Wah> Pedal Monsters Klone> Bogner Uberschall> Walrus Audio Janus> Randall RM20> Line 6 M9> Randall RM20
#4
buy a long cable and cut it down to make it fit...

takes about 10 mins.

all you need is a soldering iron and some cutters
My Rig:
Maverick F-1, Ibanez RG1527, Schecter Omen 8
Marshall JVM 410H,
Hand built 4x12 w/ V30s
Current board:
PXL LIVE
TU2
WHAMMY IV
MXR M132
MXR M101
TIMMY
NS2
MXR M108
XOTIC EP
TC DREAMSCAPE
DL8
#5
the 6505 has an effects loops, so the Tuner-Wah-OD-Gate go in front of the amp and don't need to be connected to the rest of your effects