#1
Hello, I will be swapping out the neck and middle single coils in a Saga ST 10, for some standard fender single coils that my friend will be giving me. Later on, I'll be replacing the pickguard with an HSS style guard. The original single coil bridge pickup will be replaced with a Lace Alumnitone Deathbucker. The deathbucker DOES use 250k pots, so it'll work fine with the single coils. The deathbucker is coil splittable, and I would like to know if it's possible to wire it to a switch in order to split it, without effecting the other pups. I don't want to have to put the switch back into non-split mode in order to switch to the single coils. Thanks in advance.
Last edited by guitar42697 at Aug 3, 2014,
#2
Yes you can hook it up to a two way DPDT switch using this wiring diagram:

http://www.guitarelectronics.com/product/WIRING_MOD_HB001/Guitar-Wiring-Mod---HumbuckerCoil-Tap-North-Coil.html

Then do the rest as you normally would with an HSS diagram.
Gibson RD Silverburst w/ Lace Dissonant Aggressors (SOLD)
Electra Omega Prime Ceruse
Fender Franken-Jag Bass

Amps and the like:
Laney VH100R
Seismic Luke 2x12
Dunlop 105Q Wah
Gojira FX 808
Line 6 M9