#1
Hi

I got a Schecter with the floyd rose bridge, and the socket of the whammy bar seems to be wiggling. It's not just with the bar plugged in, even without it I'm able to wiggle the socket on the bridge.

I request assistance on my quest for a tight whammy socket

Luffe_
#2
Take the big center plate off the back of the guitar where the trem springs are. You will see the back side where the arm inserts into socket/coupler on the Floyd. You will see an allen head bolt on the end of it, you will want to tighten that bolt and you should be good to go. Just make sure you use a good proper fitting wrench to prevent from stripping it out. Hope this helps you out.
Last edited by Way Cool JR. at Aug 5, 2014,