#1
hi i am new to this forum
and i m planning to make a guitar with EMG 89r/sa/89 combo
as i inspired by the steinberger GL-7 series guitar,
i did ask emg, they said 1 pot only responsable for one emg 89,
and i look the steinberger GL-7, they only have 1 toggle switch for coil split
and 3 switch for switching pickups,
and that's what exactly i want to pabricate, is any one has some info for the wiring?
or the wiring info for EMG 89r/89?
with 1 toggle switch , 1v, 1t?
thanks
#2
My Rig:
Maverick F-1, Ibanez RG1527, Schecter Omen 8
Marshall JVM 410H,
Hand built 4x12 w/ V30s
Current board:
PXL LIVE
TU2
WHAMMY IV
MXR M132
MXR M101
TIMMY
NS2
MXR M108
XOTIC EP
TC DREAMSCAPE
DL8
#3
If you get new emgs they will have the solderless system, so you just have to plug the conectors where you need them to go. The only thing you need to solder is the switch, and that depends on the type of switch you will use. Im not really sure how you can put 3 pickups in the control module, mine only had space for 2 of them... You can still wire them by hand i guess. Also, you will need a 5 way switch if you want to use the coil tap on the 89s and the sa separately. Or use push/pull pots.
Joža je kul. On ma sirove z dodatki pa hambije.
Last edited by gorkyporky at Sep 19, 2014,