#1
Here's a build log, for anyone who's interested, of my tube screamer I'm working on. It's basically a TS808 clone but with plenty of modifications.
First off, it's going to be true-bypass (a requirement for all my pedals). I'm also going to have a gain boost with a separate footswitch and LED indicator and an "amount" knob. Then there's going to be a toggle switch that switches between standard diodes or red LEDs in the clipping section of the circuit; there'll also be a third position on the switch that lifts the diodes so I can use the pedal as a clean boost. A second toggle switch will select standard or asymmetrical clipping, and a third switch will flatten out the tube screamer mid-hump.

Here's my PCB from General Guitar Gadgets:
(Invalid img)

Here's some pics of my parts:
(Invalid img)
(Invalid img)

A quick mock up of about what it should look like:
(Invalid img)
#2
Can anyone tell me how to get my pictures to appear in the post so you don't have to click on a link to see them?
#3
Quote by transformed
Can anyone tell me how to get my pictures to appear in the post so you don't have to click on a link to see them?

You need to get the direct URL to the JPEG image (not the Google Drive page) and then put that URL inside (Invalid img) tags.

Like this, but without the blank spaces:

(Invalid img)
Squier "VMC" Stratocaster
PRS SE Singlecut
tc electronic polytune
CMAT MODS Signa Drive
Blakemore Effects Deus Ex Machina
DIY gaussmarkov Dr. Boogey
EHX Small Clone
Mooer ShimVerb
DIY Beavis Devolt
T-REX Fuel Tank Chameleon
Ampeg GVT52-112
#4
Here's the circuit board with most of the components soldered on. This took a lot longer than it should have because my soldering iron has been acting up .
(Invalid img)
Still can't get the pictures to show up in the post
#5
Quote by transformed
Still can't get the pictures to show up in the post

Because you're still trying to link to the Google Drive page for your image.
Like I told you befrore, you have to use the URL ending in "*.jpg" for the (Invalid img) tags to work. Use a different host, like Tinypic, for example.
Squier "VMC" Stratocaster
PRS SE Singlecut
tc electronic polytune
CMAT MODS Signa Drive
Blakemore Effects Deus Ex Machina
DIY gaussmarkov Dr. Boogey
EHX Small Clone
Mooer ShimVerb
DIY Beavis Devolt
T-REX Fuel Tank Chameleon
Ampeg GVT52-112
#6
Quote by Linkerman
Because you're still trying to link to the Google Drive page for your image.
Like I told you befrore, you have to use the URL ending in "*.jpg" for the (Invalid img) tags to work. Use a different host, like Tinypic, for example.

Thanks for your help; sorry I'm so dense. I'll do that next time.