So I've been using a Mesa Dual Rectifier in my band for a few years now, and I love it. Recently a buddy lent me his EVH 5150III to play with, and it's an amazing amp, but it didn't have that girthy snarl that I was used to with the Dual Rec, but it did have an amazing clarity and tightness that I loved. So I decided to run them in stereo. Now that was a mistake on my part because it was basically the greatest tone I have ever heard in my life and now I have my heart set on adding a 5150III into my rig. And here lies my problem...

I need all 3 channels on both amps to switch simultaneously. I want both cleans on at the same time, both leads on at the same time, and so forth. I would also like to run them through stereo effects, so I run one amp through the left side and one amp through the right side of every pedal, then to their own respective cabinets. And I would like to control all of the effects and channel switching with one foot controller on the ground. This is a common setup I have seen numerous times, but I have never dabbled with anything midi or any of the controllers or stuff like that.

I assume I'm going to need a Voodoo labs ground controller and a GCX switcher. Both amps use midi footswitches, is there a product that can just plug straight in with midi? Are there any cheaper products on the market to achieve the same result? At the moment I only run a few pedals in the loop for cleans only and I will probably be replacing them with a TC Electronics G Major when I build this new rig. Does anyone have an idea of how I can do this with the least amount of products? I would like to try to save money where I can. Thanks!
-Mesa Dual Rectifier (3 Channel) with KT88 and KT66 Tubes
-Peavey 6505+
-Roland JC120
-Ibanez Tone Blaster TBX150H
-Mesa 4x12 Straight Cab
-Marshall 1960BV
-Gibson Les Paul Custom
-Gibson Flying V
-Line 6 M13
I think the TC Electronic G System can handle the job of switching channels and give you effects in a single package.
G.A.S. Afflicted