#1
I know there have been threads discussing this, but I'm not worried about the tone of the actually pick...

I just wanna know if the pointy tip will ever file down on it's own like other picks, or if it'll last much much longer.

As a shredder, I personally wish all picks would never lose their sharp tip through the dulling process. Maybe it's just something that I will have to accept. I was hoping that things might be different though after trying stainless steel or bronze because the material is much denser.


What is your experience?
Last edited by DeathShredder23 at Jan 18, 2015,
#2
It will last much longer. I have owned one for years, and it has not lost its point.

In fairness, I don't use it like I used to because I switched to stone and carbon fiber picks- better grip, different tonal characteristics.
Sturgeon's 2nd Law, a.k.a. Sturgeon's Revelation: “Ninety percent of everything is crap.”

Why, yes, I am a lawyer- thanks for asking!

Log off and play yer guitar!

Strap on, tune up, rock out!
Last edited by dannyalcatraz at Jan 18, 2015,
#4
Quote by DeathShredder23
I know there have been threads discussing this, but I'm not worried about the tone of the actually pick...

I just wanna know if the pointy tip will ever file down on it's on like other picks, or if it'll last much much longer.

As a shredder, I personally wish all picks would never lose their sharp tip through the dulling process. Maybe it's just something that I will have to accept. I was hoping that things might be different though after trying stainless steel or bronze because the material is much denser.


What is your experience?


they tend to go through strings a little faster(IIRC), and it makes it easier to scratch the lacquer on the front of your guitar.

i myself have found what works best for me, the jazz iii in carbon fiber, they last long and have a good grip.
WTLT 2014 GG&A

Quote by andersondb7
alright "king of the guitar forum"


Quote by trashedlostfdup
nope i am "GOD of the guitar forum" i think that fits me better.


Quote by andersondb7
youre just being a jerk man.



****** NEW NEW NEW!
2017-07-07 2017-07-07 Update and a Chat On Noise Constraints *** NEW FRIDAY 7/7
2017-04-13 RUN AWAY from COMPUTERS!!! TCE? RANT ALERT!!!
2017-03-02 - Guitar Philosophy 1001- Be Prepared For the Situation (Thursday 2017-03-02)
2017-02-21 How to Hot-Rod the Hell of your Stratocaster for $50! (Tuesday 2017-2-21)
Resentments and Rambling from a Guitar Junkie
---> http://trashedengineering.blogspot.com/
#5
I’ve been using two titanium picks (Epic Grip) for guitar for over a year and they’re still in good shape. But metal picks don’t hold up well playing bass; those big bass strings chew the tip off in a few months.
#6
If any of y'all are interested in trying out some JazzIII wood picks,
I'm in the process of making some.

They got some nice grip on them, especially the coconut ones. These wood picks feel pretty light but are 2.7mm thick so they're comfortable to hold,
Clean crisp attack thats characteristic of a JazzIII too!

I think all picks eventually wear down with use, it just depends on the material.
As far as steel goes, I'd pick gemstone over it any day. Polished stone just glides over the strings while steel tends to feel alot more scratchy imo

Last edited by Iron_Age at Jan 18, 2015,
#7
I made myself a stainless steel Jazz III and it never ever showed any signs of wear. My strings, however, needed to be changed once a month if I played often enough because I'd chew through the string windings.

If you want picks that will wear down very slowly check out the Dunlop carbon fiber Jazz III, Gravity picks or the Winspear picks Shiv IV. I've been using winspears for a while now, they are ultra low resistance material so they barely wear down even after a few months of playing. I've been on the same one for a month or so now and it looks brand new. Plus Tom Winspear is a stand-up guy, know him through sevenstring.org
Gibson RD Silverburst w/ Lace Dissonant Aggressors (SOLD)
Electra Omega Prime Ceruse
Fender Franken-Jag Bass

Amps and the like:
Laney VH100R
Seismic Luke 2x12
Dunlop 105Q Wah
Gojira FX 808
Line 6 M9
#8
The thing is, I can't play regular jazz 3s cause the size of the pick is just too damn small.

I have to have a pick that is at least 2MM, which is why if all else fails I'll have to go back to the dunlop ultex sharps.

I bought a gravity pick and 3 months later the tip is already worn down. I love that sharp tip and want it at all times.

Maybe one of you guys could make me some sick picks for cash, or maybe you know a great pick maker?
#9
Quote by DeathShredder23
The thing is, I can't play regular jazz 3s cause the size of the pick is just too damn small.

I have to have a pick that is at least 2MM, which is why if all else fails I'll have to go back to the dunlop ultex sharps.

I bought a gravity pick and 3 months later the tip is already worn down. I love that sharp tip and want it at all times.

Maybe one of you guys could make me some sick picks for cash, or maybe you know a great pick maker?


That will make a 2mm Sharp-shaped stainless steel pick? The thing will weigh a lot. Like, probably at least 3 or 4 oz. Check out Dragon's Heart Guitar Picks. They claim you can play their picks between 1000 and 1500 hours with little to no signs of wear. Each pick has 3 points, one of which is like a Ultex Sharp.

When I said I made my own Jazz III picks I cut them with a dremel out of a stainless steel Ice Pix pick. Then took them to an emery board for about an hour to smooth out and dull the edges. More of a reshaping than an actual making.
Gibson RD Silverburst w/ Lace Dissonant Aggressors (SOLD)
Electra Omega Prime Ceruse
Fender Franken-Jag Bass

Amps and the like:
Laney VH100R
Seismic Luke 2x12
Dunlop 105Q Wah
Gojira FX 808
Line 6 M9
#10
Thanks for the recommendation but those dragon picks look like shit and I doubt it would feel comfortable in my hand. That three different tip scheme is ****ing stupid...

Do you know of any other custom pick shops besides gravity, v-picks?

I think I'm gonna try a winspear shiv xl thin.
#11
Quote by DeathShredder23
Thanks for the recommendation but those dragon picks look like shit and I doubt it would feel comfortable in my hand. That three different tip scheme is ****ing stupid...

Do you know of any other custom pick shops besides gravity, v-picks?

I think I'm gonna try a winspear shiv xl thin.


Just get the regular XL. I find the thinline to be very flex-y. More suitable for acoustic strumming. The regular XL is stiff as a board.
Gibson RD Silverburst w/ Lace Dissonant Aggressors (SOLD)
Electra Omega Prime Ceruse
Fender Franken-Jag Bass

Amps and the like:
Laney VH100R
Seismic Luke 2x12
Dunlop 105Q Wah
Gojira FX 808
Line 6 M9
#13
It's not huge. Remember, the picks are tapered. So the area you hold is probably around 2mm. I find the tip on the slimline very flexy, much the opposite of a stainless steel or 2mm pick, which would be very stiff. You'll get used to the regular pretty fast.
Gibson RD Silverburst w/ Lace Dissonant Aggressors (SOLD)
Electra Omega Prime Ceruse
Fender Franken-Jag Bass

Amps and the like:
Laney VH100R
Seismic Luke 2x12
Dunlop 105Q Wah
Gojira FX 808
Line 6 M9
#14
Quote by DeathShredder23


I bought a gravity pick and 3 months later the tip is already worn down. I love that sharp tip and want it at all times.


Seriously, you don't spend a few minutes with a piece of sandpaper and sharpen your pick every now and then? I have a couple of Gravitys that have been around for well over a year. I clean them up with some fine sandpaper and we're good to go. It's a maintenance issue, like changing strings, oiling your fretboard, cleaning the DNA sludge off the guitar, polishing the frets.
#15
Quote by dspellman
Seriously, you don't spend a few minutes with a piece of sandpaper and sharpen your pick every now and then? I have a couple of Gravitys that have been around for well over a year. I clean them up with some fine sandpaper and we're good to go. It's a maintenance issue, like changing strings, oiling your fretboard, cleaning the DNA sludge off the guitar, polishing the frets.


No man I never thought of that. I've only ever heard of people using sandpaper to finish necks, or to add grip to picks...

It sounds pretty easy to do. Just a simple filing type job, right? Any specific grit that I'll need?
#16
Seriously, you don't spend a few minutes with a piece of sandpaper and sharpen your pick every now and then?


Never thought of that. Don't know that I will do it, but there's definitely nothing wrong with the idea, especially if it is a pick you really like.

Sturgeon's 2nd Law, a.k.a. Sturgeon's Revelation: “Ninety percent of everything is crap.”

Why, yes, I am a lawyer- thanks for asking!

Log off and play yer guitar!

Strap on, tune up, rock out!
#17
Quote by TheStig1214
That will make a 2mm Sharp-shaped stainless steel pick? The thing will weigh a lot. Like, probably at least 3 or 4 oz.


I highly doubt that. I play steel guitar. The tone bar I use is made of stainless steel. It is roughly the size of a Jazz III in terms of width. It's a bit over 4 inches long, which works out to probably about 100 millimeters gave or take. It weighs about 12 oz, bit less maybe. So the thickness of a 2mm pick would be about 2% of the length and therefore about 2% of the weight, so a bit less than .24 oz.

Obviously that is all approximate, but still accurate enough that I would safely say that a 2mm stainless steel pick would not be more than half an oz.

That's just my two cents though.

Edit: Come to think of it, stainless steel is actually less dense than copper and nickel, which they use in coins. So if you figure that a quarter is about the same size as a pick and about 1.75 mm thick, a quarter should be roughly the same weight as a 2mm stainless steel pick.
There's no such thing; there never was. Where I am going you cannot follow me now.
Last edited by theogonia777 at Jan 25, 2015,
#19
Quote by DeathShredder23
No man I never thought of that. I've only ever heard of people using sandpaper to finish necks, or to add grip to picks...

It sounds pretty easy to do. Just a simple filing type job, right? Any specific grit that I'll need?


Nothing special, and no specific grit (I use a fairly fine one, or even one of the wife's emery boards). Only takes a few seconds. I normally use fairly thick stubby style picks (Big Stubbies if I have to buy them, Gravity Razers in 2 or 3mm)