#1
Tried it today, when I activate it the amp just goes silent. Wtf?
Gear:
Dean RC7X (Bareknuckle Coldsweat pickups)
Ibanez Rg2570Z (Bareknuckle Juggernaughts)
Schecter KM-6
Schecter Hellraiser Hybrid 7 String
Engl Powerball II
Orange PPC412
Line 6 Pod HD500X
#2
I assume you have the pedal powered by 18V and that the pedal is in working condition; what do you have the level, gain, 250, 500, 1k controls to? Having those too low will drop volume. If the amp has level controls to the loop, turn them up.

Are the cables in correctly? Send to pedal input, return to pedal output?
Charvel So-Cal (SH6TB/N, killswitch), Jackson RR5FR (TB6/Jazz, Drop C). Joyo pxl pro.
Loop1=Crybaby from hell, Boss PS-5, Seymour Duncan 805 or Green Rhino, EQD Hoof or Earthbound Audio Super Collider. Loop 1 into ISP Decimator II.
Loop 2 (FX loop)-Line6 M9, TC Spark Mini. Loop 2 into mxr 10band. All into a Peavey Triple XXX 212, Ibanez IL15.
#3
Does it work if you put it before the amp instead of in the loop?
Name's Luca.

Quote by OliOsbourne
I don't know anything about this topic, but I just clicked on this thread because of your username :O
Quote by Cajundaddy
Clue: amplifiers amplify so don't turn it on if you need quiet.
Quote by chrismendiola
I guess spambots are now capable of reading minds.
#4
Pedal works fine in front of amp, yes am using 18V power that came with it gain is at -12, volume at 12 most settings in the middle are at 0 with a cut at the 62 and 31hz 16k hz and slight boost to the middle (500,1k)
Gear:
Dean RC7X (Bareknuckle Coldsweat pickups)
Ibanez Rg2570Z (Bareknuckle Juggernaughts)
Schecter KM-6
Schecter Hellraiser Hybrid 7 String
Engl Powerball II
Orange PPC412
Line 6 Pod HD500X
#5
Try a patch cable between send and return to test the loop.
Gilchrist custom
Yamaha SBG500
Telecasters
Randall RM100 & RM20
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Atomic Amplifire
Marshall 1960A
Boss GT-100


Cathbard Amplification
My band
#6
Quote by amonamarthmetal
Pedal works fine in front of amp, yes am using 18V power that came with it gain is at -12, volume at 12 most settings in the middle are at 0 with a cut at the 62 and 31hz 16k hz and slight boost to the middle (500,1k)

Gain at -12? That's all the way off. I've never tried that with mine. What happens when you put Gain at 0? Maybe it's cutting the signal
Guitars:
Jackson Kelly KE3 - MIJ (Distortion/Jazz)
Jackson DKMGT Dinky (EMG 81/85)
ESP E-II Eclipse Custom (JB/'59)
ESP LTD EC-1001FR (EMG 81/60)
Fender MIM Strat

Amps:
Mesa/Boogie Dual Rectifier Roadster 212
Laney IronHeart IRT-Studio
Peavey Vypyr 30
Peavey ReValver Amp Sims
TOOOO many T.C. Electronic Pedals. . .
#7
If it's at 0 it just clips. Having the gain cut has increased clarity I find. I can't see it being the loop as when the pedal is deactivated, everything is fine. It is when I turn it on that things just go silent
Gear:
Dean RC7X (Bareknuckle Coldsweat pickups)
Ibanez Rg2570Z (Bareknuckle Juggernaughts)
Schecter KM-6
Schecter Hellraiser Hybrid 7 String
Engl Powerball II
Orange PPC412
Line 6 Pod HD500X