#1
Hi I have been given a 1963 hofner club style 125 electric guitar and it doesn't work. I decided to open the control panel and have a look. I noticed a lose wire but I don't know were it goes and I cant see any broken solder. Would anyone be able to send me a picture of the control panel wiring. It would be of great use to me. Also any other wiring you can photograph.

To get to the control panel wiring there are only two screws holding it on. It is easy enough to remove

Thanks
Cameron
#2
take a few photos of the guitars wiring and I'll let you know what the problem is.

is it a basic one pickup , one volume one tone guitar? if so this should help. Since you're not using a seymour duncan pickup you'll still have use out of this. Chances are the pickups a 2 wire conductor so bare wire to the back of the volume pot the other goes to the hot lead contact of the pot as you can see.

Last edited by Tallwood13 at Aug 9, 2015,