#1
The two last strings are closer to the fret board than the other 6, this is extremely annoying as when I am doing some picking excises I sometimes miss the last two strings when picking. I think its my saddles are lower on the last two strings than the rest how do I raise them?
#2
You can either use magic, or show us your bridge.
Quote by Diemon Dave
Don't go ninjerin nobody don't need ninjerin'
#3




Not long ago I removed them all and put them all back to try and sort this problem out and it didn't work
#4
you need to get a small allen key and raise the B/E saddles up a little.

Make sure you loosen the strings first
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#5
It'll prob be a 1.5mm(or 1/16").

As Robb said, loosen the strings first, and make sure to raise both sides equally so the saddle is level.
Quote by Diemon Dave
Don't go ninjerin nobody don't need ninjerin'
#6
Quote by slapsymcdougal
It'll prob be a 1.5mm(or 1/16").

As Robb said, loosen the strings first, and make sure to raise both sides equally so the saddle is level.

well you don't want the saddles equal, the E should be slightly lower than the B to account for the fret-board radius.
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#7
Quote by Robbgnarly
well you don't want the saddles equal, the E should be slightly lower than the B to account for the fret-board radius.


This is why I used saddle, singular, not saddles, plural.
Quote by Diemon Dave
Don't go ninjerin nobody don't need ninjerin'