#3
Yes I did. I also grounded the pickup selector (which i neglected to include on the diagram) so I'm a bit stumped at the moment. I'm measuring resistance across everywhere I'm expecting to as well.
Deadly badgers made my weed
#4
If it's noisy in every possible switch position, I'd turn to the pickups or a possible ground loop.
These go to eleven...
#5
Quote by JimPlaysGuitar
If it's noisy in every possible switch position, I'd turn to the pickups or a possible ground loop.

Definitely isn't the pickups, they sounded great before. I will look into a possible ground loop, thanks.
Deadly badgers made my weed
#6
Check all the solder joints, could be a cold solder or two wires touching when cover is put on.