Hi all,

i'm mounting EMGs directly into an Ibanez RG body. Any idea where I can get these screws??

Looking everywhere for them. Obviously regular screws wont work as they need to fit into the wood directly.

Main setup:

ESP Eclipse
PRS Torero SE
Mesa Boogie Dual Rectifier Roadster head, 2x12 cab
FX: Crybaby Slash Wah, Ibanez TS9x, Mesa Boogie Throttle Box, Boss TU-2, BF-3, DD-3, PS-6, RC-3, etc.
I have a duncan hot rail I direct mounted, I was able to just get away with wood screws that are smaller in diameter than the original.

I've heard of people drilling a small hole in the cavity where the screw would go, and gluing in a nut with the same thread as the screw, that being said, the holes in the pickup for the screws normally need to be drilled out. The springs would just go under the pickup instead of above it as you would have with a pickguard or humbucker ring. Stuffing pickup packaging foam underneath them helps.