#1
I want to install a 4-way switch in my Tele style guitar with 2 humbuckers but I want to make sure that this wiring even works before I order the switch. I want the switch to be as follows

Neck humbucker
Neck split and bridge split in parallel
neck humbucker and bridge humbucker in parallel
bridge humbucker

I came up with a diagram for the switch that I think is correct. Can someone verify that this works?
Guitars
Douglas WRL595, ESP LTD EC-50, 60's Partscaster
Amps
Peavey Valveking 112 w/Vet30
Pedals
Fender Starcaster Chorus ,MXR Classic Overdrive, Artec 8 Band Equalizer, Digitech Hardwire Delay
#2
I think that will work but in the "split" position it will leave each pickup's unused coil floating. Ideally you'd short out the unused coil to kill any noise it picks up but this would require a third switch pole. But I may be over-thinking it...

If you try it, I'd like to know how it worked out.