Hello, I have just purchased some new Pick Ups for my Epiphone SG, the current Pick Ups are Humbuckers and the volume pots are the ones that you pull out to change the setting.....

I want to install new pickups, is there a way to do it without changing the pots..... See pictures in Doc
you could, but it'll be tricky. You'd have to solder wires together so you can use those molex connectors to connect the pickups to the wiring.

It'll be easier to just buy a couple pots. It'll cost you $15 on www.mouser.com to get 2 Bourns push pull 500k pots.
Current Gear:
LTD MH-400
PRS SE Custom 24 (Suhr SSH+/SSV)
ESP Horizon NT-7 (SD Full Shreds)
Squier Vintage Modified 70s Jazz V (Duncan Quarter Pounds + Hipshot Kickass)
UA Apollo Twin Duo
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.