So i bought an RG120 off Crgslst for $80 to hack on while the band is on hiatus.
Figured i'd post up
Stainless frets
re-levelled fretboard
locking tuners
Warman G-Rail for bridge pkup
Ibby V8 in neck (not wired yet)
lathe collet for switch knob with an o-ring
the size i used was a 3mm ER11. Just in case.
O ring is R04 ID *7.0 mm
single volume
tried to bevel edges. wood hates me.

The paint is Rustoleum Satin Black with 2 coats of
Rustoleum Reflective paint.
then 4 coats of Deft clear lacquer.

Let me know what you guys think.

RavenWest 1000Q/Schecter neck
ibanez RG3EXFM1 /Dimarzio Evolution
Martin Stinger ST-4 /Kona Strat neck
Martin Stinger ST-2
Squire DG-9 acoustic
Jay Turser JT Slimmer
Bugera 333
2x12 homemade cab
Marshall AVT150H head
B-52 4x12 cab