#1
I am using the e530 sans power amp at the moment. Just using the built in SS output and the line out into my interface.

My concern is that the fx loop and line out both give out a very low level signal.

For example.

From the fx send into a G-Major 2. The level received by the unit peaks at -24. That's with the channel level at around noon which gives me reasonable bed room volume with headphones/cab

I also experience the same thing when i use the regular Line out into my interface. If i use the line in input on my interface i have to crank the amp channel to max to get to a peak of about -10. This is with the back level knob cranked all the way to +15db.

Is this normal?