#1
Hey guys,
Been searching around, but I haven't been able to find quite what I want.

Basically, my setup will be:
Neck (DiMarzio Air Norton S) (humbucker)
Middle (Fender Mexican stock) (single)
Bridge (SD Stag Mag) (Humbucker)

1 Volume
1 Tone (push/pull)
5 way switch


Ideally, the setup would be:
Push/pull down: (Standard HSH)
1. Bridge humbucker
2. Inner bridge + middle SC
3. Middle SC
4. Inner neck+ middle SC
5. Neck humbucker


Push/pull up: ("strat")
1. Bridge inner coil
2. Inner bridge + middle SC
3. Middle SC
4. Inner neck+ middle SC
5. Neck inner coil

Anyone know if this is doable? Any extra parts needed? Just buy an S1 switch? Airspeed of a European swallow?
#2
^ not that well up on wiring, but my gut feeling (which is likely wrong) is that it'd probably be easier to do that with the push-pull down if the humbuckers don't auto-split.
Quote by crownegamers
I saw in a couple of pictures that on Bucketheads Les Paul (only some pictures) that his neck pickup is painted in white. Can anyone explain to me why he would do this, and if there are any pros and cons.

Quote by dspellman
The guy wears a KFC Bucket and a white mask during performances, and you're interested in the color of his pickup covers?