Hey, so I'm new here and I have a question. I have an orange rockerverb 100 mk iii head and I was wondering if I could run an ampeg svt 810 i have, if I run it as two separate 4x10 into the two 8ohm spots on the back of my amp (since the rockerverb can't handle a 4ohm cab)
I'd suggest NOT running it as two 8 ohm cabs on that head. You'll end up with a 4 ohm overall load anyway (the Rockerverb will handle one 8 ohm cabinet, one 16 ohm cabinet or 2 16 ohm cabinets, but not two 8 ohm cabinets, as I recall).