#1
In my strat, I've got a Seymour Duncan Little '59 in the neck position, a Seymour Duncan Hot Rails in the middle position, and a Wilde/Bill n' Becky L500XL in the bridge position. Standard strat wiring, 5-way switch with 1 volume and 2 tones. Since it's got all humbuckers, I find no need for the notch positions on the 5-way. I want to install the 3-way switch with full neck humbucker in the neck position, full middle humbucker in the middle position, and full bridge humbucker in the bridge position. I haven't found any wiring diagrams for this configuration on the internet. Anyone ever tried this configuration?
#2
ul need tele 3 way switch , like these- >( http://www.tdpri.com/attachments/3-way-switch-1-jpg.3467/ )
( http://s1216.photobucket.com/user/feedback_uk/media/2012-05-23_09-56-28_473.jpg.html )
wire the hot wire from neck on the first left, the hot from midle to the second left , the hot from bridge to 3 from left, the 4 is your output so wire those to volume,or whatever, the rest 5,6,7,8 u wont be needing. ground is on the chassis.


this is a diagram for 2 hummbuckers on 3 way switch ->( http://www.tdpri.com/attachments/3-way-switch-1-jpg.3467/ )
this is how the switch works ( http://www.tdpri.com/attachments/ibby_5-way-jpg.74450/ )
the only reason to use the 678 pins are iff u want to get 2 pickups in middle position.
#3
kristbubnjar Those are the cheap import switches you would find on import guitars from Asia (I already have quite a few in my toolbox) but I have a proper Fender 3-way Tele switch laying around and I want to put it to good use. (The 5-way in my strat is kinda rusted and stiff)