#1
Hello guys.
I'd like to know if I could connect line out from Peavy Bandit 112 into M-Audio 2x2M interface (it has two line inputs from behind) I think it's possible but I do not know if I should use spkr cable or instr cable would be enough. Then I would use spkr sim.
Thank you for any help.
#2
You can use an instrument cable, it should be fine. The line out should have a speaker simulation on it but maybe it will not. Also be sure you are using a LINE OUT not a speaker out. If you use a speaker out, you'll blow something up. With the line out you may need a pad to knock down the level a bit.

If you are using speaker simulations, why not just plug the guitar directly into the interface and use amp sims as well?
#3
Will Lane
(This is my actual profile btw)
I already have several vsts for guitar but I'm just curious if the analog transtube circuit gives me more "living" tone.
#5
Quote by jozef2451
Will Lane
(This is my actual profile btw)
I already have several vsts for guitar but I'm just curious if the analog transtube circuit gives me more "living" tone.
You can try both, but proper VST's will probably sound better.

Also, multis are looked very down upon on UG. Good luck.