#1
Hi everyone.

I have a Schecter C-1 Custom, as pictured here: http://www.schecterguitars.com/vault/listing/c-1-custom-2013-12-04-detail

For some time now, the tone pot (the left most in the picture, right most when playing it) has been sheared off.  I can pinch what little metal is available and adjust the tone with my fingernails, but this is also a push-pull knob for tapping the coils to single-coil mode.  I haven't had the ability to do this since the knob broke off.

I am trying to find a replacement push-pull pot, but I don't know exactly what configuration it is.  The pickups are Seymour Duncan.  From initial Googling, the most likely rating is an audio-tapered 500k ohm DPDT.  Anyone know for sure?  Or have a better replacement?  I still have the knurled chrome knob, so I really just need the pot.

Thanks in advanced.
#2
Most likely it IS an audio taper 500k push pull. CTS makes one, and it is great. 
Dave @ Seymour Duncan
#3
I wish someone would invent a push/pull pot that doesn't rip its shaft out thus destroying the pot whenever you want to pull the control knobs off. Even the really nice CTS push pull pots do that.
Quote by Axelfox
Reeeeeeeeeeeeeeee

Quote by H4T3BR33D3R
I also have to do that. Cottaging this weekend
#4
Any brand of 500k tone pot should work fine. But if you plan on buying a CTS or something similar, keep in mind that they wont fit in the hole in your guitar body without some sanding or drilling . So if you don't want to widen that sweet sweet hole, you should just get an alpha type pot like this https://www.amazon.com/Parts-EP-0286-000-Audio-Taper/dp/B004MNB9XS/ref=sr_1_3?ie=UTF8&qid=1490469964&sr=8-3&keywords=push+pull+pot
#5
Quote by jedigovnaUG
Any brand of 500k tone pot should work fine. But if you plan on buying a CTS or something similar, keep in mind that they wont fit in the hole in your guitar body without some sanding or drilling . So if you don't want to widen that sweet sweet hole, you should just get an alpha type pot like this https://www.amazon.com/Parts-EP-0286-000-Audio-Taper/dp/B004MNB9XS/ref=sr_1_3?ie=UTF8&qid=1490469964&sr=8-3&keywords=push+pull+pot


CTS do a metric-sized pot now.

https://www.axesrus.co.uk/1-x-CTS-Pot-Split-Shaft-Metric-Size-p/cts59met.htm

EDIT: Oh hey, UG is bugging out again.
Quote by Axelfox
Reeeeeeeeeeeeeeee

Quote by H4T3BR33D3R
I also have to do that. Cottaging this weekend
#7
Quote by jedigovnaUG
T00DEEPBLUE oh that's awesome. I didn't know those existed. But do they have push pull pots in that size? because that's what the OP needs

Sadly, no.
Quote by Axelfox
Reeeeeeeeeeeeeeee

Quote by H4T3BR33D3R
I also have to do that. Cottaging this weekend