So im trying to put a hot rails in my squier. I took out my old pup and put in the hot rails just as it told me. I put the black wire on position one on the selector. Soldered and taped the red and white together. Then put the green and bare on the volume pot. After this, no signal would come from any pickup.

So after doing several different wiring combinations i found that if i put the green or the bare wire on position 6, i could get the bridge pup and the middle/bridge combo to work. ( i accidentally removed the black wire from the neck pup on the selector and didnt know of it went in position 3 or 4 but ive tried it in both spots). Can anyone tell me where i messed this up?