#1
Hey, 

I've poured over diagrams and read a whole lot about wiring, I'm just sure what the intention was with the two mini-switches. 
Setup is:
2 Single Coil/2 Volume/2 Tone/2 Mini-Switches:
(Not sure what bottom white wire running from bridge is.)
My biggest question is where to attach the pickup wiring and what to wire in the switches/results I would get.
It currently has a bar running between the center connection of both switches. See pictures below:
Overall Setup:

https://drive.google.com/open?id=0B9OoqjmsH6MbX05JTF9nQ253RjQ

Mini-Switches:

https://drive.google.com/open?id=0B9OoqjmsH6MbN015eUItYkotUFk

Thanks for any help!
Last edited by tguitar367 at Jun 24, 2017,