Hi, I bought an Electro-Harmonix Small Clone pedal a couple of weeks ago and I also bought the Electro-Harmonix adaptor to use with the pedal. I started noticing this week that when I would play my guitar which goes to a Boss DS-1 to the Small Clone and then to my amp, that the Small Clone would not always work when I would push down on the switch. I would have to tap on the top of the Small Clone to the right of the rate knob until the connection with the cable into the input of the Small Clone made the right connection. I just wanted to know if anyone has had this same problem with this pedal and if anyone knows what the problem might be? Thanks
Loose connection inside is my guess. Open it up and soldier the bad connection.