#1
Let's say I buy a Peavey JSX (or any tube amp for that matter)
Either a head or a combo
if it's 100W or anything too big, how can I bring it down lower, like some switches on Mesas for example
can I just take power tube amps or something?
does the impendance have to be changed according to the cab

please help. Thanks loads

EDIT: how much would it cost me?
Last edited by Anty 7 at May 28, 2006,
#2
you can get an attunater, like a hot plate or something along those lines. It allows higher volume breakup at lower volumes.
#3
well pulling tubes require no money, whereas an attenuator is about $200-300

Many amps you can pull out a few powertubes to reduce wattage, but you'll have to research if your amp can do that.
Ibanez -> Peavey -> Eardrums

Apparently I'm on some list of people to listen to..?
#4
The peavey JSX has a half power switch. ANd pulling tubes is cheap but like Funky said you have to research your amp.
I traded in my Real Books for Robbins and Cotran Pathology Textbooks
#5
Quote by mexican_shred
The peavey JSX has a half power switch. ANd pulling tubes is cheap but like Funky said you have to research your amp.


yeah, it might be that the switch just disconnects those 2 tubes allready