Ok i have just put an Dimarzio FRED into the bridge position on my Ibanez GRG 170DX but it think i put it in wrong because i can here it a little but it seems really really quite, Compared to the neck,

I followed someones advice by puting the wires were the others one were and that i had to Change the colours because different makes of pickup use differnt color code

Red = White/Black
WHite = red
Bare = Green and bare

So i put the Red wire 3rd fareleft on the switch, Before was the white
Put the white/black to the first one on the right on the switch, Before it was Red
And the other Green and bare to i think is the volume knob.

Any idears Please
You should look up a diagram than personal advice/opinion. Best bet. And use proper English too. I'll see if I can find anything...


H-H http://www.dimarzio.com/media/diagrams/E.pdf
H-S-H http://www.dimarzio.com/media/diagrams/c.pdf
H-S(humcancelling)-H http://www.dimarzio.com/media/diagrams/b.pdf

Want to build a Jackson, to be fairly freaking honest.

Quote by Kanthras
Put some crap in the hole, like something sticky. And liquid-ish.
deviantART: Click Here
Last edited by IndieLee at Jun 9, 2006,