#1
Hey guys just need a lil' help.

So i have found that using regular masking tape to do a bulls yey does not work!
So i was wondering how people like slashnmash made the masking for the argzilla etc.

What is that stuff that he used to make the biohazard thing?? any suggestions welcome cheers tobz
Gibson SG (Heavily modded)
Fender USA Strat
Hohner 12 String-uber rare

Fender Silverface Twin

EHX Big Muff
Digitech badmonkey overdrive
Boss DS-1
Blackstar Distortion X
Dunlop Crybaby
Ibanez Delay
Digitech Whammy
#3
and that is what exactly?? lol

can you use like a stencil kit or something??
Gibson SG (Heavily modded)
Fender USA Strat
Hohner 12 String-uber rare

Fender Silverface Twin

EHX Big Muff
Digitech badmonkey overdrive
Boss DS-1
Blackstar Distortion X
Dunlop Crybaby
Ibanez Delay
Digitech Whammy
#4
3m is the brand, it is a tape used by painters to mask of lines and such. You should be able to get it from a hardware store.

I guess you could used stencils, i don't know how sharp the lines would be though.
#5
Well, you just add more than one layer of masking tape and the cut it out. It's what I'm going to go (if I don't go ahead and dremel the design out)
---------------
VOX AD30VT
BOSS GT8

Want to build a Jackson, to be fairly freaking honest.

Quote by Kanthras
Put some crap in the hole, like something sticky. And liquid-ish.
deviantART: Click Here
#6
what i am thinking of of something like this

https://www.ultimate-guitar.com/forum/showthread.php?t=323726&page=8&pp=20

there is a post down there where he has cut out some sort of material and is using it to mask up, any idea what that is?
Gibson SG (Heavily modded)
Fender USA Strat
Hohner 12 String-uber rare

Fender Silverface Twin

EHX Big Muff
Digitech badmonkey overdrive
Boss DS-1
Blackstar Distortion X
Dunlop Crybaby
Ibanez Delay
Digitech Whammy
#7
get the 3m green tape (its very thin width wise) to actually mask the patern, then get the blue to mask in between the green lines. stencil the design on then green tape, then blue tape.
"insert witty somewhat racial, innapropriate, degrading comment here"
#8
Slashnmash looked like he covered the bodt in regular masking tape, and cut out the design from a peice of paper he printed.
#9
that could work, but doing the green blue techinque will give you a sharper line... its what's done in automotive body work to get all the crazy designs and shit
"insert witty somewhat racial, innapropriate, degrading comment here"