#1
Hello. Over the past few days I've been trying to install an EMG 85/81 set in my ESP EX-50 guitar. I already have everything set up but the connection isn't working. Here's what it looks like now...



Thanks in advance.
#2
the wire you have got circles thats coming from the back of the volume pot should be connected to the place you have circled on the left side of your switch.

You've basically grounded your hot wire so you're not getting anything


edit: actually, looking at it, theres a lot more things wrong
#4
actually, just refer to http://www.emginc.com/downloads/wiringdiagrams/Humbuckers_active.pdf

though do the thing I mentioned in my first post there, I think thats your main problem (the thing on the back of the volume pot is the braied sheild part of the wire grounded right?)


edit: and you need to ground the bottom lug of the tone control
Attachments:
emgwiring.jpg
Last edited by seljer at Jul 5, 2006,