#1
hey. i'm wiring up a single pickup (ibanez humbucker) and a single volume pot and i'm slighty confused. the black cab;e is the ground, which i know what to do with, but i'm confused as to where the red and white wires go. i assume they are the hots so, i solder both of them to the first prong on the pot and then solder the hot from the input jack to the second prong and ground the input on the 3rd?
I R tr00 Member of UG's Gain \/\/hores - don't pm gpderek09 to join unless you are truly worthy
www.purevolume.com/mordecaiaus
Quote by xifr
There is the possibility that I may have or may or may not have gone or not gone into the danger zone.


Quote by lespaulmarshall
I love you Joel
#2
I`m guessing that black is ground, and that the white goes to the pickup cover/base, and that the red is hot...the red and white might be switched around though-
I'm not very active here on UG currently.
I'm a retired Supermod off to the greener pastures of the real world.
#3
dont worry i figured it out.
I R tr00 Member of UG's Gain \/\/hores - don't pm gpderek09 to join unless you are truly worthy
www.purevolume.com/mordecaiaus
Quote by xifr
There is the possibility that I may have or may or may not have gone or not gone into the danger zone.


Quote by lespaulmarshall
I love you Joel