#1
I was wondering if anyone has any experience with hot swapping an ESP trem with the OFR Pro since I am considering this. The bridge on my guitar is fine, but still has tuning issues, even though slight, still I would like to just have something where I know I won't go out of tune even after heavy use. Basically, I just want to know if the dimensions on the OFR Pro are smaller or similar to the dimensions of that of the ESP trem. Thanks guys.
Guitars
Agile 3100 CSB
ESP MH400 w/ Trem-Setter
Epi G-310
Applause Acoustic

Amps
1968 Fender Vibrochamp - Great amp, only $100 fixxer-upper
Line 6 Spider II

REMEMBER, ALL TONE IS SUBJECTIVE!
#2
what kinda esp trem? the modren one, or the flicker, if u have a flicker give it to me at all cost cuz i rock the '80s, but my guess is u dont have a flicker, and do you have one of the locking esp trems or one of the strat syle ones?
Member #5 of the UG Luthier's club.
member #3 of the vermont cult
Member of the Frank Zappa Fan Club. PM deadhead313313 to join"

Quote by LightningRider
T Heff, No shit I'm a n00b

Quote by Will_Minus

EDIT: t heff wins the for the best response.

Quote by carousel182
i im gonna have to agree with t heff
#3
Its a LFR, the one on my MH-400.
Guitars
Agile 3100 CSB
ESP MH400 w/ Trem-Setter
Epi G-310
Applause Acoustic

Amps
1968 Fender Vibrochamp - Great amp, only $100 fixxer-upper
Line 6 Spider II

REMEMBER, ALL TONE IS SUBJECTIVE!
#4
then i belive u can just swap them out
Member #5 of the UG Luthier's club.
member #3 of the vermont cult
Member of the Frank Zappa Fan Club. PM deadhead313313 to join"

Quote by LightningRider
T Heff, No shit I'm a n00b

Quote by Will_Minus

EDIT: t heff wins the for the best response.

Quote by carousel182
i im gonna have to agree with t heff
#5
i'd ask a guitar tech, if there's a minor difference in position in mountin screws or anything than you could run in to problems, and OFRs aren't cheap to buy. But nevertheless good luck, i'm sure it won't be too hard.
Marty