#1
I have an Ibanez RG320 with two humbuckers. And the pickup selector has five positions, does anyone know how thats set up? Like which pickups I actuallu use when the selector is in between the middle and all the way down (bridge)?
#2
I think it splits the humbuckers, so you use one humbucker, and the inside coil of the other.

I'm not sure, though. Let me check the website.

EDIT: Ok, this arrangement is old, but I think this is how it is:
Position 1. Neck humbucker
Position 2. Neck humbucker in parallel
Position 3. Both Humbuckers
Position 4. Inner coils or each humbucker
Position 5. Bridge humbucker.
Last edited by sashki at Aug 27, 2006,
#3
1st posistion = neck humbucker will act as a single coil
2nd posistion = neck humbucker will act as a humbucker (2 singles)
3rd posistion = neck and bridge pickup
4th posistion = bridge pickup will act as a humbucker (2 singles)
5th posistion = bridge pickup will act as a single coil
Been away, am back
#4
It uses a coil-tap kind of thing, using a single coil from one humbucker and the whole humbucker from the other. Petty neat stuff...