#1
can someone email me or give me a place where i can upload a .pdf file of a Gibson SG Standard? im makin one and dont want to buy one or something. my email is

ok nvm pm me for my email

anything would be greatly appreciated to the uppermost of the poppermost of my sincerity.

thanks
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
Last edited by westo at Sep 9, 2006,
#3
i need a blueprint, not a simple close-up picture
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#4
Upload? You mean you want a plan of a SG? A bit confused sorry. If you want plans, I think I can help you.
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#5
i just need an sg plan
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#6
http://www.guitarbuild.com/modules/mydownloads/viewcat.php?cid=4

Second from the bottom, it's a neck thru though, so you're going to have to pretty much forget about that whole part and just use a tenon & mortise (set neck).

BTW, I wouldnt post your e-mail on a board like this, I just signed you up for some donkey porn.

Just kidding, although somebody might actually do it.

Chris
'Aim at perfection in everything, though in most things it is unattainable. However, they who aim at it, and persevere, will come much nearer to it than those whose despondency and laziness make them give it up as unattainable.'
#7
Damn you Algee! You stole my advice!
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#8
So you signed him up for donkey porn too huh?

Chris
'Aim at perfection in everything, though in most things it is unattainable. However, they who aim at it, and persevere, will come much nearer to it than those whose despondency and laziness make them give it up as unattainable.'
#9
Of course
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#10
i like donkey porn
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#11
Quote by westo
i like donkey porn

Have you had a look at those plans? I'm making the Tele off that site.
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#12
what about u helping me out?? i cant open the .dwg file and i dont know where i can be able to open it. check ur pm's the_random_hero
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#13
Sorry man, have been a tad busy. You need a program called TurboCad 2D, it's free. I'm pretty sure you can get it off www.download.com
the program can read both the file types that are on that site that Algee linked you to
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#15
ok so i got that thing.

i really need specifications and stuff because i am building one of these. i need to have a plan with the inches and/or centimeters of everything and stuff like that
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#16
Use TurboCad 2D, it's a lot easier to work with. I don't know about that viewer, but you can print out either full size or scaled diagrams for any plans. You just tape the pages together, and you have a a full size plan of a SG
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#18
I haven't used it. TurboCad works for me
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#19
i dont want to spend money on things!!!!
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#20
If you pm me your email address, I'll send you the whole thing in a zip file. Otherwise, get Azureus and download it as a torrent. I thought I got the installer for free off the net though...
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#21
Here we go! I thought I found the installer somewhere on the net, but I couldn't find the same version I had. The closest I could find was this http://64.7.93.99/cgi-bin/dcd/dcd.cgi
I would have emailed it to you, but it's still a 18mb zipped file.
EDIT: I just found out my link doesn't get you there. You have to search for TurboCad, and it comes up as TurboCad LE.
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#22
hey i downloaded that now how do i open that one sg plan from that site? it has the .dwg extension and the turbocad can't open it.
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#23
I just set the file extension to open with TurboCad, and it worked fine.
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#25
I'd love anybody who could do me up some Strat plans too. The trem placing would be entirely dependent on the neck pocket, so I don't think you could follow plans for that.
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#26
well for my strat iim going to print a strat body and then (i don't know the word) i make the drwing on the real scale. To put the remolo i measure the distance between the nut and the 12 fret and if I double that distance i find the place to place the tremolo and then i adjust the sadles. do you understand? If i had a blueprint i would save many time.
#27
Yeah, that's how I would do it too. I took it that you were planning on using the plan to place your bridge, which is a big no-no (unless somebody was really good with CAD programs). Any chances you could transfer a Strat design to CAD?
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#28
no. I just need to know one of the measures of the body. Then i can find the others through scales and mathematical operations. maybe when i finish the body i can send some measures.
#29
Quote by the_random_hero
I just set the file extension to open with TurboCad, and it worked fine.


how do you do that?? i have bad hand eye coordination. therefore i cant figure out how to do this. yeah. how???
███████████████
We are the music makers, we are the dreamers of dreams.
████████████
#30
This is so weird. I had a lot of plans saved on my computer as dwg files, and they used to work fine. Now they don't...
The dxf files still seem to work Ok though. There's plans in there for a neckthrough SG
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#31
I finally decided how to make my strat body. I get a strat and place it above the wood and then i draw the contours on the wood. It's not the best way but i think that i have no alternatives.

Westo, you could try that too, but i understand that you want an accurate body work.
#33
Mine just automatically printed at 100% scale size
"Everybody, one day will die and be forgotten. Act and behave in a way that will make life interesting and fun. Find a passion, form relationships, don't be afraid to get out there and fuck what everyone else thinks."
#34
Quote by superbadboy2
I finally decided how to make my strat body. I get a strat and place it above the wood and then i draw the contours on the wood. It's not the best way but i think that i have no alternatives.

Westo, you could try that too, but i understand that you want an accurate body work.


thanks man. i was thinking about tracing my friends gibson sg but some other stuff is needed.

i also finally figured out how to use that dwg viewer to its potential and i got all of the measurements for everything, so now i think i'm good
███████████████
We are the music makers, we are the dreamers of dreams.
████████████