So. I have an RG-120
and I have (given i can acquire/make a stencil, a relatively easy design)
yeah, this is a crude representation, but its bascially the design. and i know the guitar i used for the picture is not a 120, but it serves its purpose

What I am asking you fine people is basically what tools/paints and steps i need to take to make this happen..
Thanks in advance.
Last edited by vivalasoad883 at Sep 26, 2006,
if you have no stencils use some painters tape like 3m. I suggest 3m because i used some other painters tape and it didn't stick too well. A couple layers of it on the guitar, draw the design on the blue tape. Get a x-acto knife to gently cut out the design. Then paint. I also think you would have to sand the guitar to take off the gloss/clear coat before painting.
Ibanez RGT42DXFX with emg 81/85
Schecter C1-Classic
Vox AD30VT
Knock off P-Bass