Im thinking about getting a X2N for my ibanez s470 but want to install it my self, but... The most i ever done with soldering wires was back a month ago when i fixed my guitar cord. the wire was loose inside both ends of my guitar cord so i tacked them back. Am i going to have a problem? or is it simple like "red wire goes to the red wire and the blue wire goes to the blue wire."
It's that simple really. Just follow the diagram/instrucitons.
Pretty easy, if you're worried draw up a colour coded diagram before you unsolder anything. The X2N might have different colour codes on the wires, you might want to check the colour codes on their website to know what you're soldering to where.