#1
Ok, so i tuned my guitar to Drop C because i like Bullet for My Valentine and As I Lay Dieing and bands like that so anyway. When ever I'm on the last two strings when i press down on one of the frets on the last two the string will hit the other frets and i can not play at all.

Its like the string is lowered or something. I have a NJ Warlock Guitar EMG pickups and a Floyd Rose i never had this problem before what could be going wrong?
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#2
Try thicker strings. I heard it's not good for a guitar's neck to be tuned so low, however.
Peavey HP Signature EXP (SH4 JB/ SH2 Jazz)
Jackson DK2M
Fender MIM Stratocaster HSS
Fender MiM Telecaster

EVH 5150 III w/ EVH 2x12 cab
Peavey Vypyr Tube 60
Fender Blues Jr.

Boss ME-50; NS-2; RV-5; BF-3
MXR M101 Phase 90
#3
Hmm it looks like the 2 strings are lowered though?
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#4
That's probably because there is no tension in the strings, get a thicker set like 10-56 or 11-56 and you should be just fine.
Ibanez RG1570 w/ Bareknuckle Pickups
Ibanez RG655
PRS SE Fredrik Åkesson Singlecut
Blackstar HT-5
Harley Benton G212 Vintage
BOSS TU-2
MXR M-108
Digitech Bad Monkey
#5
alright thanks
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)