#1
i just got a marshall tsl60 and a 1960lead
i need help badly,
how do i match the ohm?
and how long to i warm the tubes on stand by for?
i turned the amp on plugged into the guitar and put stand by on.
then after 30 seconds i turned stand by off.
i have all setting at zero and its on clean. then i turn up master and i hear NOTHING. help meeee :[[[
#2
ok, matching Ohms is just matching the numbers, pre-school stuff. I presume the Tsl has 8ohms and 16ohms. and the cab will have the same, just put the speaker cable into the 8ohms on the amp and then put the other end into the 8ohms on the cab! simple!

leave the tubes warm for maybe 2-3 minutes tops! play your amp to wear down the tubes as they wouldnt sound as good!

turn up your channel volumes, it will be "Gain" on your clean!
Follow that and it should work!
#3
uhmm the amp head has 8 - 16
and the cab says Mono - Stereo
and two out puts/inputs.
whats on the head there two red outputs which one?
#4
mono out put, pick a red jack, it should be the half/ full stack jacks. turn the gain up and you should hear noise, if nothing else, crank everything to 10 and if shit dosen't happen, something is wrong.
the lesser known of the 4
#5
ok on the head over the red outputs it shoud say "Loudspeaker out puts 8/16ohms" so the output on the laft is 8ohms and right is 16ohms.

Mono is the 8ohms imput and Stereo is 16ohms iput on the cab. So put cable onto 8ohms on head and 8ohms on cab!!
#6
I would switch the cab to mono and use the 16 Ohms socket, and switch the head to 16 Ohms and use the 16 Ohms socket on there too.
#7
right now its head ohm output is 16ohm and the cab is on mono and on the right jack it says 16ohm on the top and 8 ohm on the bottom...
i invested alot in this i hope not to break it :[
#8
Quote by False_God
ok on the head over the red outputs it shoud say "Loudspeaker out puts 8/16ohms" so the output on the laft is 8ohms and right is 16ohms.

Mono is the 8ohms imput and Stereo is 16ohms iput on the cab. So put cable onto 8ohms on head and 8ohms on cab!!

I think you'll find mono is 16 Ohms or 4 Ohms depending which socket is used on the cab and stereo is 8 Ohms per channel.
#10
Nah you're on the right track, plug the speaker cable into the right hand, red 16 Ohms socket on the head and make sure it's switched to 16 Ohms. The other end of the cable goes into the right hand, 16 Ohms socket of the cab and that is switched to mono.
#11
<a href="http://photobucket.com/" target="_blank"><img src="http://i9.photobucket.com/albums/a75/TaCo_SaUsE386/marsall001_0002.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
<a href="http://photobucket.com/" target="_blank"><img src="http://i9.photobucket.com/albums/a75/TaCo_SaUsE386/marsall001_0001.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
there :/ im still lost.
#13
Quote by treagar
Nah you're on the right track, plug the speaker cable into the right hand, red 16 Ohms socket on the head and make sure it's switched to 16 Ohms. The other end of the cable goes into the right hand, 16 Ohms socket of the cab and that is switched to mono.


+1

this guys got it nailed. for future reference, research into these things before diving in head first
Cort lover of the Bass Militia. PM Nutter_101 to join.
On cheating in a relationship...

Quote by metaldud536
If he doesn't use a gameshark, it's not cheating.




I'm a non-regular regular old user.
#14
Ok your head's not labelled like my TSL is you can use either red socket on the head just make sure it's set at 16 Ohms.
#15
ok now which socket on the cab and which setting like if the amp is on 16ohm
and the cab is on mono which socket? on the cab
#16
Quote by treagar
Nah you're on the right track, plug the speaker cable into the right hand, red 16 Ohms socket on the head and make sure it's switched to 16 Ohms. The other end of the cable goes into the right hand, 16 Ohms socket of the cab and that is switched to mono.

^ like that but your head socket isn't labelled 16 Ohms, just use the right one. I say that cause my 16 Ohm speaker in my combo uses the left socket but it's the upside down setup to your head so just use the right one on yours but I really don't think it matters which one you use.