#1
okay so i have a Schaller Lisc. Floyd Rose on my jackson dinky pro XL. i need to know how to move the saddles on this and i cant figure out how. sorry i dont have any pics, well i have 1 but it doesnt rreally show the bridge. any help would be great.
1993 Jackson Dinky Professional XL (shred)
Modified Squier Strat (blues and anything)
Vox Valvetronix AD30VT
Boss DS-1 Distortion
Dunlop Original Crybaby GCB-95
#2
Just checking, what do you want to move the saddles for?
Actually called Mark!

Quote by TNfootballfan62
People with a duck for their avatar always give good advice.

...it's a seagull

Quote by Dave_Mc
i wanna see a clip of a recto buying some groceries.


stuffmycatswatchontv.tumblr.com
#3
I assume to adjust the intonation, I'm not sure, but it should be the same as adjusting real floyds if you can find anything on that.
#4
ive searched and i cannot find anything on schaller floyds.
1993 Jackson Dinky Professional XL (shred)
Modified Squier Strat (blues and anything)
Vox Valvetronix AD30VT
Boss DS-1 Distortion
Dunlop Original Crybaby GCB-95
#5
If you want to adjust the intonation you need to loosen the small hex screws at the base of the saddles, just in front of them.
Actually called Mark!

Quote by TNfootballfan62
People with a duck for their avatar always give good advice.

...it's a seagull

Quote by Dave_Mc
i wanna see a clip of a recto buying some groceries.


stuffmycatswatchontv.tumblr.com
#6
Quote by voxdude26
ive searched and i cannot find anything on schaller floyds.


Schaller floyds are just like any other floyd.. The principal is the same with almost all of em.

There's a small hex screw on the saddle, the string would go directly over it. loosen the string (or have it off) and then the hex nut, position the saddle correctly, tighten hex nut, tune string. Rinse, Repeat.