#1
I have a squier strat and am trying to put a jagstang neck on it is this possible to work, the original neck on the strat was 25.5 and the jagstang neck is 24 please help!!!
#2
you'll need to reposition the bridge

sorry thats all the help i can be on this subject
Quote by bassmanjoe08
Dan

Don't stop being you <3


Quote by fatgoogle
I think after this relentless adding for the last 10 mins, that Dan is the coolest looking. Goddamn welsh people and my great etc etc etc etc etc granddad is welsh.
#3
First of all, do you have the Jagstang neck?

If you do, make sure it will fit in the neck pocket. Then, measure the distance from the 12th fret to the high E saddle.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club
#4
You can't put a neck that is 24 scale in a guitar that is set up for a 25.5 scale without repositioning the bridge.
Growing old is inevitable, growing up is optional

Member #9 of the Samnung Has Crabs Club , PM Powerhouse to join

Custom Build
#5
ok i have the neck and it fits into position and it worked but the itonation was off, so would i have to actually take out the bridge and move it?
#6
Did you measure from the 12th fret to the saddles? If you didn't, measure it and tell us what the distance is.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club