Page 1 of 3
#1
I've started to work on my new pedalboard today...here's some pics:







Inspiration for it came a lot from this forum....It will have more of a roadcase type
with the aluminium corners and the black plastic cover...and of course the interior will be covered with speaker carpet covering!

I will post new pictures in the coming days....Hope you like it!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Mar 18, 2007,
#2
You need a power supply dude, or you'll spend thousands of dollars in batteries lol
My gear:
-Ibanez JS 6000 Custom w/ 11-48 gauge
-Ibanez FGM 400BB w/ 10-46 gauge
-Peavey 6505 2x12 Combo
-MXR Phase 90
-Boss DD-6 Digital Delay
-Morley Wah/Volume Pro Series II
-Boss CS-3 Compression Sustainer
-Gator G-Bus 8
-Xotic BB Preamp
#3
LOL

Yeah I already have a 1spot daisy chain...but I planned to buy a Gator or Dunlop Dc brick so it be easier to carry around....
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
#4
That's pretty nice. I don't like the edge on the board, thought. But that's just me 'cause I'm a picky bastard
President of the Guitarists Born In 1991 Club. PM blues rocker or I to join

Quote by RadioHead22
I love you greendayguitar
In a non- gay, awkward-man-hug way
#6
The Gator's pretty good, and cheaper on musiciansfriend. plus one extra outlet.
My Blog
New bands you wish you knew about!

Check This Band:As Blood Runs Black
Guitarist of the month: Quorthon


Got a good band that you want to share with the world? PM me and I'll write them a review.
#7
looking sweet and neat, my friend.

you've actually inspired me to make one myself...sometime
#8
You should make it slanted. Much easier for playing live turning on and off the pedal.
Gear: Yamaha AES 620 Equipped with SD JB+APH-1
Fender American Deluxe V-Neck Equipped with BKP Mothers Milk
Fender Pro Jr., Traynor YCV 50, Diamond J-Drive MK3, Fulltone 70's Fuzz, Teese RMC Wizard Wah, Boss dd-3, Boss CE-5, Korg DT-10 pedal tuner.
#10
wowie

once i get actual pedals i'm gonna find a way to make one. yess inspiration.
Gibson SG Standard + 18volt EMG-81 & 85
Mesa/Boogie Mark IV + Recto 2x12
Keeley Modded BD-2
Vox V847a
Quote by one vision
Bureaucrats gonna crat.

Recognised by the Official EG/GG&A Who To Listen To List 2008
#13
I like it.

Cover it in velcro tho, the wood gets as dusty/dirty as hell, trust me.
"Breathe, breathe in the air
Don't be afraid to care"

Fender Strat/Tokai LS80>few pedals>Orange Rocker 30
#14
my set up is ,

guitar : ibanez rg750
amp:roland cube 60 old orange one !
f/x : snarling dogs blues bawls (wah),
carl martin red repeat (delay )
ehx metal muff and octave multiplexer
#15
Quote by damienguitar
my set up is ,

guitar : ibanez rg750
amp:roland cube 60 old orange one !
f/x : snarling dogs blues bawls (wah),
carl martin red repeat (delay )
ehx metal muff and octave multiplexer

So?
"Breathe, breathe in the air
Don't be afraid to care"

Fender Strat/Tokai LS80>few pedals>Orange Rocker 30
#17
Thanks for your comments guys!

to TwoString -> I actually based my design on yours

For the aluminum work, I'm using 3/4 and 1/2 inches, V shape stems(not sure if it's the right word), that I cut at 45 degrees angle. I will put amp corner for a better finish and look.

I'll keep you posted!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Mar 19, 2007,
#18
I think it would make the box even better if you could have someone weld those aluminum edges together and make that into a frame of some sort. Think about it...the welded frame would absorb a lot of shock and spread it throughout the case instead of focusing the impact on a single point. It would also bind together the wooden sides a bit better.

What are you going to do about latches? I say recessed butterfly latches...that would make this thing really look pro.

Glad my design could inspire this...it's friggin' fantastic! Makes me want to build a case for my Roadster now
#19
I just nosticed something. With the edges on the side of the board, won't in be hard to plug in and remove your leads to the wah and and EVH pedal? It looks like it'd be a very tight squeeze..
President of the Guitarists Born In 1991 Club. PM blues rocker or I to join

Quote by RadioHead22
I love you greendayguitar
In a non- gay, awkward-man-hug way
#20
Yeah I know....but I got right-angle cables, so it will not be a problem!

Thanks for the inputs TwoString! You got some great ideas, but I'm kind of limited with the few tools I have...but I will look into it!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Mar 19, 2007,
#22
Sounds great! Very warm and natural. Plus it's easy to use you got one knob and a switch to select different types of reverb, Spring, Hall and "Flerb", which is a mix of reverb and flanger. The only concern is the lost of volume as you turn the effect knob up....But otherwise it's a good unit!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Mar 19, 2007,
#23
Here's a really quick and rough 3D model I did. I used it to determinate the size I needed based on the real sizes of all my effects....quite useful!

((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Mar 21, 2007,
#24
Ok guys!!!! here is my finished pedalboard I'm really happy with the result! I put a Gator power supply on it too! Enjoy! Tell me what you think about it!!!











The only thing left to do is to had some foam inside the cover, to add some pressure
on the pedals and help the velcro to support them....
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Apr 11, 2007,
#25
WOOT! (I've never said that anywhere until now)

Amazing job!! If there were a JSX signature pedalboard, I'd have to think it would look something like this. Lots of chrome!! Outstanding work.

Now if you add some silicone caulk around the metal/wood joints and put a rubber gasket between the lid and the tray, that sucker would be water-tight!!

Anyone else looking at this? Look at this work!! NOW!!! This is how you look pro, not like some trashed-out hobo with a leftover piece of scrap at his feet!!!
#26
Wooooooww!!


SICK!


Write another review for the EHX Holy Grail...I don't care if you already have written on, it just looks and sounds sexy!
Co-Founder of the Orange Revolution Club


-Esp/Ltd Ec-1000 w/ BKP Mules
-2-channel Titan
-Oversized Bogner 2x12 Cabinet
-Fulltone OCD
-RMC Picture Wah
-T.C. Electronic Nova Delay
-Larrivee D-03R
#27
Wow thanks for the comments guys! Really!!!

TwoString -> I actually put silicone on all the edges directly on the wood, under the carpet.
And I put some kind of windows sealing foam between the tray and the lid,
you can (hardly) see it on the last picture(black stuff all around the cover)....
hope it will do the job!

Sorry I couldn't post other "in progress" pictures because I don't own a digital camera and I borrowed one tonight....so feel free to ask me questions!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Apr 11, 2007,
#28
Also, nice guitar, i have the same, but with BKP mules.

Great guitar !!!

Oh, and btw, was that pedal board a pain to make? I Honestly don't know where to start...
Co-Founder of the Orange Revolution Club


-Esp/Ltd Ec-1000 w/ BKP Mules
-2-channel Titan
-Oversized Bogner 2x12 Cabinet
-Fulltone OCD
-RMC Picture Wah
-T.C. Electronic Nova Delay
-Larrivee D-03R
#29
That looks awesome

Excellent work

it a shame you didnt do a tut or more of a photo journal
#30
That's IMMENSE.

Honestly, looks completely professional.
"Breathe, breathe in the air
Don't be afraid to care"

Fender Strat/Tokai LS80>few pedals>Orange Rocker 30
#31
brilliant, it looks totaly professional, I am VERY impressed.
TEEP!!! Oiiiiiiieeeeeeeyyy!!!!!!
#33
Thanks again guys! You're making me even prouder!

Jinskee -> It was not really hard to do actually, you just have to invest time(and a little money too!), if you want something good. Look for a style and choose the size you want to make it. Once you are fixed with that, build the basic box(look at the first pictures of my thread). To me it's the most important part cause you need to do it right if you want it to come together nicely. Then just go with the overall details like paint, carpet, hinges...Don't rush it! Take your time and you will be happy with the result!

You can PM me if you want more details! Or just ask!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
Last edited by KoskineN at Apr 12, 2007,
#35
I am going to make one of these one day, I swear it.

Mine is gonna be long and thin.
My Blog
New bands you wish you knew about!

Check This Band:As Blood Runs Black
Guitarist of the month: Quorthon


Got a good band that you want to share with the world? PM me and I'll write them a review.
#36
Jinskee-> What do you want to hear about the Holy Grail? You seems to like it a lot!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
#37
KoskineN, where did you get the files for the pedals in your 3D model?
#38
Quote by woodenbandman
I am going to make one of these one day, I swear it.

Mine is gonna be long and thin.


....just so you know, girls rather have it short and fat
TEEP!!! Oiiiiiiieeeeeeeyyy!!!!!!
#39
I did them myself! I'm actually a 3D artist, so it helps a lot!
((( KoskineN )))

-ESP LTD EC-1000 Deluxe VHB
-Fender Telecaster Lite Ash
-Mesa Roadster 2x12 combo
-Fulltone Clyde Dlx, OCD, '69
-Boss BD-2, CE-5, DD-20, TU-2, RC-2
-MXR Phase 90 & EVH Flanger
-EHX Little Big Muff - Holy Grail - Micro POG
#40
That's a damn sweet pedal board.
Pedal board thread anyone?


Actually this raises me a question about pedalboards. What if you buy like 5 new pedals, and you can't fit them in your board?
tough luck eh.
Page 1 of 3