My Fender Bullet strat's pickup switch was on it's way out, so I got another one. This one is round shaped, with the places to solder wires on both sides. The one in the guitar was square, with totally different looking configuration. All the wiring diagrams from Fender show the wiring, but the only problem is that they are all to a square-shaped selector switch. So now I have a new selector switch, but have no idea where to re-solder the wires onto it because it looks so different. It's the right switch, I'm sure. Any help anyone can offer would be great. I haven't taken the old switch off yet, just to be safe. Thanks!