im doing a project where im going to try to spray paint a design on my guitar. the only way i can think of doing that is by using a stencil, but that will be really hard because my design is very intricate and will be almost impossible to cut out, so im asking if anyone has done a design on their guitar or bass and will tell me how i can take a design from a peice of paper and transfer it onto my bass in silver
Either learn how to airbrush, or to be very careful using a razor to cut your design out on the masking tape.
'Aim at perfection in everything, though in most things it is unattainable. However, they who aim at it, and persevere, will come much nearer to it than those whose despondency and laziness make them give it up as unattainable.'
do multi layer stenciling
Member #5 of the UG Luthier's club.
member #3 of the vermont cult
Member of the Frank Zappa Fan Club. PM deadhead313313 to join"

Quote by LightningRider
T Heff, No shit I'm a n00b

Quote by Will_Minus

EDIT: t heff wins the for the best response.

Quote by carousel182
i im gonna have to agree with t heff