#1
alright, did a dumbass thing, but when striping the wire to solder it to the back of the pot, i cut through one of the wires. all i need to do is solder to the back of the pot, but i dont have much room. its a Dean ML so its about half the size of my Les Paul. so i need some tips on keeping the soder on the wire and keeping the wire down without it coming up.
Quote by Joey Walker
Quote by anaoshak
look at all those knobs, he must have a mean tone.

Bottle caps buddy, they are bottle caps



Quote by Shib
The internet: Men are men, women are men and little girls are FBI agents.
#2
Hold it with a pair of needlenose pliers, that should do the trick. Or you could solder on a little extension wire and attach that to the pot.