its like its loose, not the bar the hole that the bar goes in. i can spin the bar around to the back and it works perfectly but if i try to use it forward it hardly affects it. does anyone know what could be wrong and how to fix it?
If you are talking about the trem arm it sounds like the hole may be stripped. Go to the hardware store and buy a role of teflon thread sealer. In the plumbing section. As for help if you don't know. Apply a thin layer around the threaded end of the trem arm and screw it back in. Floyd Rose copy trems are generally made of softer metal and looser tolerances. This will probably fix it. I had one and did this.