#1
Basicly Here Is How It Goes, I have a ibanez Rg 350.

I have recieved a

Seymour duncan Jb model, For neck
Dimarzio YJM Sig For Middle
Dimarzio Evolution, For Bridge.

i have a 5 way selector switch with 0 neck - neck & middle - Middle - middle & bridge - bridge 0.

i also have only one tone and one Push pull volume pot ( 500k)

i basicly want a basic wiring setup, But with the evolution With a coil split (pull the pot to emulate a single coil effect (ONLY ON THE BRIDGE) then push it back in to get the Full humbucker sound) feature,

( i understand the difference between coil tap & coil split)

Just wondering if any of you guys could help me, ive looked everywhere only Strat and Gibson guides, ( 3single coils, or 2 humbuckers) thanks For your Help, Ryan
My Gear
  • Ibanez RG 350 DX ( White )
    Seymour Duncan - Jb Model (Old)
    DiMarzio YJM DP217
    DiMarzio Evolution

  • Laney Linebacker L50
  • Ibanez ThrashMetal
  • V-amp Effect Board
  • Roland MicroCube
Last edited by shredtheibanez at Aug 5, 2007,
#2
Is THIS what you're looking for?

Edit: solder and tape together the red & white wires from your neck pickup instead of soldering to your push/pull pot.
Last edited by 1watt at Aug 5, 2007,
#3
Quote by 1watt
Is THIS what you're looking for?

Edit: solder and tape together the red & white wires from your neck pickup instead of soldering to your push/pull pot.

Thanks Man, I Looked Everywhere, and closest i found was two volume / two tone. Thanks you saved me sooo much trouble!!!

1 watt Thank You
My Gear
  • Ibanez RG 350 DX ( White )
    Seymour Duncan - Jb Model (Old)
    DiMarzio YJM DP217
    DiMarzio Evolution

  • Laney Linebacker L50
  • Ibanez ThrashMetal
  • V-amp Effect Board
  • Roland MicroCube
#4
Glad that's what you were looking for. Be sure to remember me in your will.
#5
I don't mean to sound like a dick, but that's not what you want. That will split both pickups. It's not a big deal, but you could accidentally switch from bridge to neck, and have the single coil tone.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club
#6
Quote by Will_Minus
I don't mean to sound like a dick, but that's not what you want. That will split both pickups. It's not a big deal, but you could accidentally switch from bridge to neck, and have the single coil tone.

Yeah, he said, exactly what i thaught you would do, and thats Tape off the the red and white of the neck, so you will only have the bridge soldered on to the push/pull and this will only split the bridge then.. is that right??
My Gear
  • Ibanez RG 350 DX ( White )
    Seymour Duncan - Jb Model (Old)
    DiMarzio YJM DP217
    DiMarzio Evolution

  • Laney Linebacker L50
  • Ibanez ThrashMetal
  • V-amp Effect Board
  • Roland MicroCube
Last edited by shredtheibanez at Aug 6, 2007,
#7
Yeah, that's right.

By the way, you might want to consider moving the push/pull to the tone pot. When push/pulls are pulled, tremolo arms ususally will scrape along the top of them. Sometimes the switch will push the switch.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club
#9
thanks guys helped alot!!!! thanks, and yeah its a good idea to i guess. Also, i looked on there and they didnt have my setup h-s-h 1 vol 1 tone... Thanks guys
My Gear
  • Ibanez RG 350 DX ( White )
    Seymour Duncan - Jb Model (Old)
    DiMarzio YJM DP217
    DiMarzio Evolution

  • Laney Linebacker L50
  • Ibanez ThrashMetal
  • V-amp Effect Board
  • Roland MicroCube
#11
Quote by rockr09
A jb for the neck? I thought they were bridge pickups?

This is An old jb (second hand) but still in full condition, it was made just before seymour Put his big ass logo on it, ive checked the serial over and it was original made for the neck of jeff becks guitars, then seymour had a redesign and now the new versions are placed in his bridge section.
My Gear
  • Ibanez RG 350 DX ( White )
    Seymour Duncan - Jb Model (Old)
    DiMarzio YJM DP217
    DiMarzio Evolution

  • Laney Linebacker L50
  • Ibanez ThrashMetal
  • V-amp Effect Board
  • Roland MicroCube