#1
i need to know how to install these gibson pickups that i got just recently into an epiphone firebird... help!~#!@$#
#2
2 volumes, 2tones, 3 way switch right?
and how many wires are coming from each pickup?
and do you know how to solder?
#3
Quote by s.r.v.
2 volumes, 2tones, 3 way switch right?
and how many wires are coming from each pickup?
and do you know how to solder?


ya. 2 vol. 2 tones. 3 way switch. there is one wire from each pickup... but they have a metal sheild around them that is like an interlaced wire cover. does that have to be connected to anything? i can solder okish.
#5
The metal braid is soldered to the back of the volume pot, the inner wire is soldered to the middle lug of the volume pot.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club
#8
No, I don't. The inner wire can go to the middle lug or the outer lug (the one that isn't soldered to the casing).
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club